Behold, the Legotron, Mark I – a 4×5 Camera made of LEGO bricks. Cary Norton out this bad boy together (here’s an in-detail post that gives the how), and these are the basic specs:
- I have no clue how many pieces are in this camera
- It’s dimensions are roughly 7?x6.5?x7?
- The main parts are a Main box, internal box, film holder/ground glass slot, lens board, lens.
- The lens is a 127mm ƒ4.7 I got on ebay for ~40 dollars
- The lensboard is two Plates deep and fits perfectly in the slot I built for it (though, I cut it down to one plate in the center to actually mount the lens).
- Focus is achieved by sliding the internal box forward and backward.
The focus range is limited to roughly 3 feet to about 18 inches. It’s good for portrait, but certainly can’t focus to infinity. Mark II (once I get to that) should have a way better focusing range. I’m planning on making a pinhole lens board too.
The ground glass is just plexi, sanded with various fine grits. It’s held in place by a film holder that previously had light leaks, but now has the aluminum center cut out. The fit is tight and I ran a line of liquid nails too, just in case.
Yes, but does it take good pictures? You betcha. Here are some shots of the Legotron Mark I and the pics Norton snapped with it:
[via]
Ol' MagDonkle Had a Farm is the Fallout version of Old MacDonald Had a Farm…
https://youtu.be/5520YBTAeWg?si=PHo1_oxSma4i0f_w Behold the ultimate fusion of past and future as Supercar Blondie unveils the TMC-12x:…
Dustin Ballard of 'There, I Ruined It' Strikes Again! What happens when The Beach Boys'…
Diamond are hard to draw, especially when representing them in 3D on a sheet of…
For today’s edition of “Deal of the Day,” here are some of the best deals…
The tension surrounding TikTok's fate in the United States has hit a critical point as…