Spray-on batteries could change device design


----------------


We’ve done a great job of producing batteries in ever decreasing sizes, but one limitation is that they still remain fixed shapes: largely cylinders with the occasional disc or rectangular block. That in turn places restrictions on the design of battery-powered devices. Now a new technique could mean flat or even curved batteries that fit a wider ranger of housings.

The system, developed at Rice University in Houston, allows a battery to be applied to a surface in the same way as spray-paint.

The logic behind the system is that a battery has five active parts: the anode and cathode (negative and positive), a separating material, and two separate current collectors. Standard cylinder batteries have these materials as five layers that are then rolled up together.

The new system works by reproducing the contents of each parts into a sprayable liquid. These are overlaid, producing a battery just half a millimer thick. The key is that the separating material includes Poly(methyl methacrylate), also known as acrylic glass. As the name suggests, it’s a transparent material that is lighter than glass and shatter-resistant.

Using this material means that the layers of the battery stay together, while the battery can fix itself to a wide range of surface. In testing this worked on ceramic, glass and steel. The battery also worked when sprayed onto the curved surface of a beer stein.

To check the battery provided power as well as staying in place, researchers sprayed enough “paint” to cover nine bathroom tiles. These were then able to provide the 2.4 volts needed to power a set of LEDs for six hours.

At the moment the main drawback is that producing the liquids that make up the battery can only be done in a dry and oxygen-free environment. The list of components would therefore have to be tweaked to allow it to be mass-produced at an affordable price.

Another potential use of the technology would be to adapt it to solar-powered batteries, meaning surfaces could be sprayed and used to capture energy without the need to attach dedicated panels.

(Image credit: Scientific Reports via nature.com)





5 Responses to Spray-on batteries could change device design

  1. This is a perfect example where "cool" and "practical" diverge. The whole point of standardized batteries is the fact they can be easily and cost effectively replaced when it no longer functions properly. If a battery is "painted" onto a surface, you cant remove it and replace it with a new one.

    • That doesnt mean you can’t replace the battery. The applications are limitless. Think of your cell phone. Instead of the battery, you replace the skin now. However the ability of being able to use on curved surafces or turning the entire phone into a battery to extend life would be worth it. No more need for space in device for a battery, we can get them even smaller now.

    • It's unlikely that this technology would be used in consumer electronics. It is far more useful in places where a great deal of battery power is needed but the weight of batteries is a significant drawback, such as airplanes, satellites or space stations. (Needs a dry and oxygen-free environment, huh? Gee, space is both of those things! Why aren't we investing in going there anymore?) Instead of running lights off of heavy batteries inside the chassis, this might make possible the ability to "paint" the batteries onto the interior structure of an object. This would allow for a more compact and lightweight plane/satellite/space station which means a huge savings in fuel costs.

  2. Ughh these batteries would be so ineffecient it wouldn't be worth the weight in space and its not practical to use in anything with replaceable batteries.