Subscribe by EmailHow to Make a Cheap USB Solar Charger
November 6, 2007 by David |I am a huge fan of solar technology and I love to see it continue to progress, so imagine my surprise when I found a video on how to make a cheap, portable USB solar charger.
I really enjoyed this video, and would love to see more projects like this if anyone knows of any.
You Might Also Like:
- Nanosolar PowerSheets
- USB rechargeable battery packs for iPod, other gadgets
- Charge your gadgets with the SOLo Solar Lounge Table
- Yoggie Introduces World’s First USB Security Appliance
Did you enjoy this post? If so, subscribe to the geeksaresexy RSS feed.
Grrr. Am I the only one who really hates it when people say “sodder” instead of solder?
(I’d also have thrown in a cheap 5v regulator just incase the cells were putting out more than 5v on a sunny day, some USB stuff is rather sensitive.)
can any1 teach me how to make one?
The only problem is that you have to have sorar panels that give the exact power that the battery requires to be charged according to its manual or else it will be destroyed after two-three times of being recharged that way.So it can be used only in case of emergency..
Despite that i have to say that it’s a brilliant idea.Keep on!
Photovoltaic cells produce current proportional to illumination. The voltage is dependent on temperature, going up as it gets colder, but it’s a pretty shallow slope. So it won’t overvolt just because the sun is shining, in fact the voltage goes down because the cell gets hot.
Adding a regulator to this thing is going to cut it’s production a lot. A 7805 regulator has two diode drops, i.e. if you want 5 V, you have to feed it 7.2 V. Maybe a 5 V zener across the output would be a better way to limit voltage, but at some point the current would blow it up.
Whether a little extra voltage would matter depends on what you’re putting it into. Ordinary electronics won’t care. I accidentally ran my 2-AA CD player on 7.5 V for an extended time, and it didn’t care a bit. Ni-Cad’s and NiMH’s won’t mind being overcharged a little bit, either.
Lithium ions are much more sensitive to overcharge, which is why they usually carry their own protection circuitry, so again a feeding it a little extra voltage won’t be a problem.